Discuss availability, assessment scope and any fee.
03Decide with a clear scope
Review proposed work before you agree.
Explore this page 9 sections
By Roof Doctor NM · Published November 13, 2026 · Homeowner planning guide
Use the roof area, not just the house size
A roofing square is 100 square feet of roof surface. A 2,000-square-foot roof is 20 squares. That is different from a two-story home with 2,000 square feet of total living space. Garages, additions, overhangs, slope and separate sections can change the roof area. Use an existing roof measurement if you have one; do not climb onto the roof for this tool.
Our current planning rates
Owner-provided planning rates · reviewed November 13, 2026
System / scope
Per square (100 sq ft)
Example: 2,000 sq ft
Basic shingles
$485–$525
$9,700–$10,500
TPO
$850–$1,250
$17,000–$25,000
Tile reset
$550–$850
$11,000–$17,000
Metal
$750–$1,200
$15,000–$24,000
New tile
$850–$2,500
$17,000–$50,000
Silicone coating
$500–$1,000
$10,000–$20,000
These are Roof Doctor NM’s owner-provided planning rates, not a statistical Albuquerque average, inspected quote or contractor offer. Multiply roof surface area ÷ 100 by the selected per-square range. No automatic extras, discounts or tax calculation are added. Actual pricing may fall outside this range.
Before comparing quotes, confirm removal and disposal, layers, decking or insulation, flashing, drainage, access, equipment or solar coordination, permit responsibilities, taxes and warranty terms. The calculator does not establish that these are included. Tile reset assumes a reset scope, not all-new tile; silicone is a coating scope, not a replacement or a recommendation that the existing roof is suitable.
A worked example you can check
At the owner-provided basic-shingle rate of $485–$525 per square, a measured 2,000-square-foot roof gives a planning range of $9,700–$10,500. A 2,000-square-foot TPO scope uses a different rate and gives $17,000–$25,000. These are arithmetic examples, not accepted job prices. They do not determine whether either system belongs on your property.
Why the lowest number may not cover the same work
Ask each contractor to specify what comes off, what stays, and how concealed repairs are approved. Review details at walls, penetrations and drains alongside the main roof surface. Agree on who handles equipment, permits, cleanup and closeout. Compare written exclusions before assuming two totals buy the same project.
GAF’s homeowner cost guidance also identifies roof size, slope, complexity, material and location as cost variables. Our tool uses your inputs and owner-provided rates; it does not use GAF’s calculator or measurements.
Get a useful range, then request a thorough assessment
Try the calculator without giving your email. If the range fits your planning, carry the inputs into a quote request and describe your concerns. A request does not reserve a visit; availability and any assessment fee are confirmed first. Never assume an online budget includes an unseen defect or a particular warranty.
These planning answers help you prepare a request. Property-specific findings and the agreed written scope guide any work.
Roof replacement cost factors in Albuquerque
Roof size, system, removal, access, insulation, decking and connected detail work can change the proposed scope. Use the existing calculator as a planning aid, then request a property-specific quote. Ask which assumptions were used and how additional discovered work would be approved and priced.